Description
xStage 3 Engine Software is for use with the Dinan Oil Cooler and Intercooler; optimizing performance and drivability from the combination.
The Dinan Team made a blistering fast software upgrade, using our years of experience tuning BMWs for the street as well as winning back-to-back Grand-AM DP Championships and the 2011 24 Hours of Daytona.
Dinan Performance Software is so much more than just turning up the turbo boost. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. Protecting your BMW while giving the most performance is the definition of "Performance Without Sacrifice". Drivetrain and engine components are analyzed for strength then the program is tested on the dyno and in the real world for durability and drivability. Dinan matches the new car warranty coverage for up to 4 years or 50,000 miles including the possibility of consequential damages. The top speed governor is removed on Manual RWD vehicles only, enabling the BMW to achieve its full potential.
FEATURES
- More Power (with Oil Cooler and Intercooler): Max gains of +60 HP @ 5300 RPM and +80 lb-ft TRQ @ 3900 RPM
- 50 State Emissions legal; CARB EO # D-176-39
- Huge torque gains drastically improves acceleration
- No hesitation between shifts
- Downloads through the BMW diagnostic port, the same way BMW loads software
- Top speed governor removed on manual RWD vehicles, you decided how fast you want to go.
- Full Map Rescaling, for drivability from idle to wide open throttle and everywhere in between
- Properly Returned Fuel Mixtures, to save you gas and protect your engine
- Water Pump Speed Increased, to improve cooling
- Retain all BMW factory engine damage safeguards
SPECS
| Dinan Point Value | 3 |
| Emission Code | 1 |
| Factory Rated HP | 300 |
| Factory Rated Torque (lb-ft) | 300 |
| Labor Time (Hours) | 0.5 |
| Max HP Gain |
60 @ 5300 RPM |
| Max Torque (lb-ft) Gain |
80 @ 3900 RPM |
| Peak HP |
373 @ 5300 RPM |
| Peak HP Gain |
60 @ 5300 RPM |
| Peak Torque (lb-ft) |
408 @ 3500 RPM |
| Peak Torque (lb-ft) Gain |
79 @ 3500 RPM |
| Product Type |
Engine Software |
| Required Items |
Dinan Oil Cooler (various SKU's) and Intercooler (D330-0009B, D330-0010B, D330-0012, D330-0013 or D330-0015) |
| Part Number |
D900-31TC |
EMISSIONS (1)
This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.
The following vehicles are considered Emissions Controlled Vehicles:
1966 and newer U.S. manufactured California Certified vehicles
1968 and newer U.S. manufactured Federally Certified vehicles
1968 and newer Foreign manufactured vehicle
TECH RESOURCES
Oil Cooler and Intercooler are required in order to run Stage 3 Engine Software.
COMPATIBILITY OF APPLICATIONS
| YEAR | 2011,2013, 2014 |
|
MAKE |
BMW |
|
MODEL |
335I, 135I, 335I XDRIVE, 135IS |
|
SUBMODEL |
BASE |
|
BODY TYPE |
COUPE, SEDAN, CONVERTIBLE |
|
ENGINE |
3.0L L6 |
- Choosing a selection results in a full page refresh.